KL955B Construction Loader: Evaluating Tires, Ground Clearance and Site Access
Construction and aggregate yards can contain compacted soil, gravel, paved sections, stockpiles and uneven transitions between working areas. These conditions affect how a wheel loader moves, positions itself and completes repeated loading cycles.
When selecting a construction loader, buyers should therefore consider the working surface and site layout alongside rated load, bucket capacity and engine power. Tire specifications and ground clearance are useful comparison points, but neither can independently establish that a machine is suitable for every site.
KLIONCE KL955B: Key Published Specifications
The KLIONCE KL955B construction loader has the following published specifications:
These figures describe the listed configuration. Final equipment selection should be based on the actual working requirements and the machine documentation supplied with the order.
Evaluate Tire Requirements Against the Surface
Before purchasing a loader, describe the surfaces on which it will operate. A prepared yard with compacted aggregate has different requirements from a paved loading area or a site with loose, uneven ground.
Ask the supplier to confirm whether the specified tire configuration is appropriate for the planned duty cycle, surface conditions and expected load. Tire availability, approved alternatives and any changes to the machine configuration should be confirmed before ordering.
Do not assume that a particular tire specification guarantees traction on wet, muddy or unstable ground. Operators must assess the actual surface and follow the machine operating instructions.
Use Ground Clearance as One Part of the Assessment
The KL955B has a published minimum ground clearance of 534 mm. This value can help buyers compare machine configurations where uneven transitions and site obstacles are relevant.
However, ground clearance alone does not establish overall mobility. Surface strength, slope, tire condition, machine dimensions and load position also influence how safely the equipment can operate.
Before delivery, inspect the access route and identify drainage channels, ramps, obstacles and turning areas that may affect machine movement.
Check Working Space and Receiving Height
The listed overall dimensions of the KL955B are 7,950 × 2,980 × 3,420 mm. Buyers should compare these dimensions with entrances, travel lanes, stockpile spacing and the space available for loading and turning.
The listed dump height is 3,300 mm. Confirm that the intended receiving vehicle or loading point is compatible with the machine configuration, allowing for safe positioning and sufficient clearance.
Rated load and bucket volume must also be considered together. A 3 m³ bucket does not mean every material can be carried at full volume while remaining within the permitted load.
Plan the Complete Loading Cycle
Estimate the distance between the material pile and the receiving vehicle, the number of loading cycles per hour and the expected daily workload.
Repeated long-distance travel may affect productivity differently from short, repetitive loading cycles. Worksite organization, stockpile position and truck scheduling should therefore be considered during equipment selection.
The LUYU wheel loader selection guide also emphasizes matching equipment to materials, workload, working space and budget.
Keep Maintenance and Inspection in the Plan
Routine maintenance should follow the manufacturer documentation. Relevant inspection items may include tire condition, visible structural damage, hydraulic components, steering, brakes, bucket connections and fluid levels.
Any unusual noise, visible leakage or change in operating response should be investigated by qualified personnel before the machine returns to normal service.
Choose the Loader Around the Whole Worksite
The KLIONCE KL955B combines a published rated load of 5,000 kg, a 3 m³ bucket and a 534 mm minimum ground clearance. Buyers should evaluate these specifications together with tire suitability, access dimensions, loading height and daily workload.
Review the KL955B product details, browse the KLIONCE Product Center, or visit the KLIONCE News Center for further equipment information.